| Product Search | Home |
FP1500 SERIES TRANSMITTER
The FP1500 Series paddlewheel flow transmitters have a 4-20 mA output that can be read out on the OMEGA® DPF60 Series ratemeter/totalizer/batcher, and a simultaneous sine-wave pulse output suitable for direct hook-up to the OMEGA® DPF700 Series ratemeter/totalizer/ batcher.
The FP1500 sensor has PVDF, ceramic, and EPDM (or FPM) wetted parts for broad chemical compatibility. They are used with the FP1000 series installation fittings. When ordering the FP1500 transmitter, please specify the installation fitting and the desired calibration range for the 4-20 mA output. The FP1500 can also be supplied with an integral, field scalable 31/2 digit LCD display with selectable decimal point. A frequency source is required for scaling the display.
SPECIFICATIONS
Accuracy: ±1/2% of reading + 0.1% of full-scale span
Measuring Range: 1.6 to 26 ft/sec
Wetted Parts: PVDF body and impeller, ceramic shaft, EPDM (standard) or FPM (optional) O-rings
Non-Wetted Parts: Polyethylene and polycarbonate
FP1000 Output: Sine-wave frequency, 0.7 V p-p/fps into a load of 100,000 ohms
Maximum Fluid Viscosity: 1 Centipoise
Max. Pressure*: 200 PSIG @ 68°F with 316SS fitting
Max. Temperature*: 212°F @ 25 PSIG with 316 SS fitting.
Ambient Temperature Range: 0 to 50°C (32 to 122°F)
Ambient Relative Humidity: 80%
Sensor Weight: 0.9 kg (2 lbs.)
*The max. temperature and pressure of the sensor may be limited by those of the fitting into which it is installed.See pressure vs. temperature graph on page F-37 for maximum rating for plastic fittings.
Power Input: 12 to 30 Vdc @ 25 mA
Max. Loop Impedance:
900 ohms @30 Vdc without integral LCD display;
750 ohms @30 Vdc with integral LCD display
Time Constant: switch selectable from 0.2 to 9.2 sec
Unscaled Pulse Output: Open collector rated from 5 to 30 Vdc
Enclosure: NEMA 4X (IP65) polycarbonate
Overflow Alarm: Open collector, 30 Vdc max. at 30 mA max.
To Order (Specify Model No.)
| Model No. | Price | Description |
| Sensor with Sine Wave Pulse Output Only | ||
| FP1001 | $225 | PVDF/EPDM/ceramic sensor for |
| 1/2" to 4" pipes | ||
| FP1002 | 240 | PVDF/EPDM/ceramic sensor for |
| 5" to 8" pipes | ||
| Sensor with 4-20 mA and Open Collector Pulse Outputs | ||
| FP1501* | 495 | PVDF/EPDM/ceramic transmitter |
| for 1/2" to 4" pipes | ||
| FP1502* | 545 | PVDF/EPDM/ceramic transmitter |
| for 5" to 8" pipes | ||
* For units with built-in, field scalable 31/2 digit LCD display, add suffix "-M" to the model number and add $110 to price.
For units with FPM O-rings (replaces the EPDM O-rings), add suffix
"-FPM" to the sensor model number, no additional price.
Comes with black polycarbonate locking nut and plastic ring (non-wetted) for securing sensor onto fittings, plus complete operator's manual.
Accessories
| Model No. | Price | Description | ||||
| PSU-24B | $40.00 | Wall socket plug-in transformer, 115 Vac in, 24 Vdc out on | ||||
| screw terminals | ||||||
| TX4-100 | 28.50 | 4-Wire Shielded cable, 100 ft. | ||||
Ordering Example:
| Qty | Description | Price |
| 1 | FP1501 transmitter for 1/2" to 4" pipe | $495 |
| 1 | FP1010-SS 1" stainless steel fitting | 295 |
| 1 | Calibration for fitting for 0-18 gpm | no charge |
| 1 | PSU-24B transformer | 40 |
| Total Price | $830 | |
Installation Fittings
| PVC Schedule 80 | PVDF | Polypropylene | Stainless Steel | ||||||
| Pipe | Min. | Model | Model | Model | Model | ||||
| Size | Flow, GPM | No. | Price | No. | Price | No. | Price | No. | Price |
| 1/2" | 1.6 | FP1005 | $85 | FP1105 | $200 | FP1105-PO | $140 | FP1005-SS | $295 |
| 3/4" | 2.4 | FP1007 | 85 | FP1107 | 200 | FP1107-PO | 140 | FP1007-SS | 295 |
| 1" | 4.4 | FP1010 | 85 | FP1110 | 220 | FP1110-PO | 150 | FP1010-SS | 295 |
| 1 1/4" | 7.2 | FP1012 | 95 | FP1112 | 240 | FP1112-PO | 175 | FP1012-SS | 295 |
| 1 1/2" | 10.0 | FP1015 | 100 | FP1115 | 265 | FP1115-PO | 205 | FP1015-SS | 295 |
| 2" | 16.8 | FP1020 | 110 | FP1120 | 305 | FP1120-PO | 250 | FP1020-SS | 295 |
| 2 1/2" | 24 | FP1025 | 115 | N/A | | N/A | | FP1025-SS | 395 |
| 3" | 36.8 | FP1030 | 135 | N/A | | N/A | | FP1030-SS | 395 |
| 4" | 62.4 | FP1040 | 160 | N/A | | N/A | | FP1040-SS | 395 |
| 6" | 140.8 | FP1060 | 195 | N/A | | N/A | | FP1060-SS | 395 |
| 8" | 246.4 | FP1080 | 240 | N/A | | N/A | | FP1080-SS | 395 |
NOTE: PVC, PVDF and polypropylene fittings up to and including 2" line size are tees with union nuts and socket-weld connections; PVC fittings from 21/2" through 8" are saddle fittings. SS fittings up to and including 11/4" line size are FNPT threaded; SS fittings from 11/2" through 8" line size are weld-on fittings.
|
| |||||
